Wesdome Discovers Two New Zones in Hanging Wall Basalt of Kiena Deep Zone, Including 2,850 g/t Gold (Uncut) Over 1.5 Metre (Core Length)

TORONTO, Nov. 16, 2022 (GLOBE NEWSWIRE) — Wesdome Gold Mines Ltd. (TSX: WDO) (“Wesdome” or the “Company”) today announces underground exploration drilling results from the Kiena Deep A Zone at the Company’s 100% owned Kiena Mine Complex in Val d’Or, Quebec.

Since the completion of the PFS in 2021 and subsequent preproduction activities, underground drilling has been focussed on exploration to test sectors proximal to the Kiena Deep A Zones. As part of this exploration focus, early success discovered the Footwall Zones last year. Earlier this year, exploration confirmed the presence of the South limb in the folded Kiena Deep A Zone at depth (see press release dated June 1, 2022). Recent drilling has continued to return high grade assays from this South limb area (reported below and Figure 1a, 1b). This area remains open along strike and down dip. The discovery of additional zones proximal to the A Zones represents a significant benefit to the mining from using common infrastructure. Development metres planned per sub level will leverage access to more ounces, thereby positively impacting future mining.

Most recently, drilling intersected two new zones in the hanging wall basalt (Figure 1b). The first zone was observed in holes N103-6839W1A, N103-6839W2, and N103-6839W3. This zone consists of disseminated sulfides (pyrrhotite±pyrite) in basalt associated with a stockwork of veinlets composed of quartz ± pyrite±pyrrhotite±chalcopyrite±visible gold, (mm- to cm-thick) showing a random orientation. Up to now, the strike, dip and true thickness of this zone are unknown. The second zone, observed in hole N103-6839W4, consists of a quartz-cabonate vein ( <10 cm-thick) with visible gold that returned 2,850 g/t Au over 1.5 m (See Figure 1b and Photograph Figure 2). Currently, the strike and dip of this vein are unknown. The adjacent or “shoulder” assays are pending for this hole. These new basalt zones all occur below an observed bend or steepening in the plunge of the Kiena Deep A Zone. Early hypothesis is that folding/faulting represented by fracturing in the hanging wall basalt could allow for a favorable environment for this type of mineralization.

Highlights of the recent drilling are listed below and are summarized in Table 1.

  • Hole N103-6839W4: 2,850 g/t Au over 1.5 m core length New Basalt Zone
  • Hole N103-6839W2: 11.6 g/t Au over 41.3 m core length (9.7 g/t Au capped,) New Basalt Zone
  • Hole N112-6838A: 36.0 g/t Au over 6.4 m core length (32.5 g/t Au capped, 4.3 m true width) A1 Zone (South Limb)
  • Hole 6839W3: 20.3 g/t Au over 12.4 m core length (19.0 g/t Au capped, 5.5 m true width) A Zone (South Limb)
  • Hole N103-6839W1A : 10.4 g/t Au over 53.5 m core length (5.9 g/t Au capped) New Basalt Zone

Assays capped at 90.0 g/t Au for A zone and capped at 35.0 g/t Au for the New Basalt Zones. True widths are estimated based on 3D model construction.

Mr. Duncan Middlemiss, President and CEO commented, “We are pleased with the recent discoveries of the South Limb and Footwall zones, and most recently the high grade results in the basalt in the hanging wall of the A Zone. These discoveries demonstrate the exploration potential of the Kiena Deep Zone. These zones have the potential to increase the number of ounces per vertical metre and to provide additional working faces during mining. The discovery of these zones highlight the potential to add ounces within the basalt, where the rock quality is significantly better than in the footwall of the A Zone allowing for increased development rates. Obviously, this area remains one of the focuses of the current drilling.

We are also very pleased with the continued expansion of the South Limb of the A Zone and local expansion of the A and A1 zones. This can positively impact project economics as the same underground infrastructure utilized to access the A Zone can be leveraged to mine these additional zones on a lower unit cost basis.

Additionally at Kiena, our paste fill plant commissioning activities remain on track and we expect the plant to be fully operational shortly, with the first paste pour scheduled for later this month.”

As well, recent drilling from 112 Level also continued to confirm the lateral extension of the A and A1 Zones (Figure 3). These new results continue to add confidence in the existing 3D model.

TECHNICAL DISCLOSURE

The underground technical and geoscientific content of this release has been compiled, reviewed, and approved by Bruno Turcotte, P.Geo., (OGQ #453) Chief Geologist – Underground Exploration of the Company, a “Qualified Person” as defined in National Instrument 43-101 –Standards of Disclosure for Mineral Projects.

Analytical work was performed by ALS Minerals of Val-d’Or (Quebec), a certified commercial laboratory (Accredited Lab #689). Sample preparation was completed at ALS Minerals in Val d’Or (Quebec). Assaying comprised fire assay methods with an atomic absorption finish. Any sample assaying >3 g/t Au was rerun by fire assay method with gravimetric finish, and any sample assaying >10 g/t Au was rerun with the metallic sieve method. In addition to laboratory internal duplicates, standards, and blanks, the geology department inserts blind duplicates, standards, and blanks into the sample stream at a frequency of one in twenty to monitor quality control.

ABOUT WESDOME
Wesdome is a Canadian focused gold producer with two high grade underground assets, the Eagle River mine in Ontario and the recently re-started Kiena mine in Quebec. The Company also retains meaningful exposure to the Moss Lake gold deposit in Ontario through its equity position in Goldshore Resources Inc. The Company’s primary goal is to responsibly leverage this operating platform and high-quality brownfield and greenfield exploration pipeline to build Canada’s next intermediate gold producer. Wesdome trades on the Toronto Stock Exchange under the symbol “WDO,” with a secondary listing on the OTCQX under the symbol “WDOFF.”

For further information, please contact:
         
Duncan Middlemiss   or   Lindsay Carpenter Dunlop
President and CEO       VP Investor Relations
416-360-3743 ext. 2029       416-360-3743 ext. 2025
[email protected]       [email protected]
         
         
220 Bay St, Suite 1200        
Toronto, ON,M5J 2W4        
Toll Free: 1-866-4-WDO-TSX        
Phone: 416-360-3743, Fax: 416-360-7620        
Website: www.wesdome.com        
         
         

This news release contains “forward-looking information” which may include, but is not limited to, statements with respect to the future financial or operating performance of the Company and its projects. Often, but not always, forward-looking statements can be identified by the use of words such as “plans”, “expects”, “is expected”, “budget”, “scheduled”, “estimates”, “forecasts”, “intends”, “anticipates”, or “believes” or variations (including negative variations) of such words and phrases, or state that certain actions, events or results “may”, “could”, “would”, “might” or “will” be taken, occur or be achieved. Forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. Forward-looking statements contained herein are made as of the date of this press release and the Company disclaims any obligation to update any forward-looking statements, whether as a result of new information, future events or results or otherwise. There can be no assurance that forward-looking statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. The Company undertakes no obligation to update forward-looking statements if circumstances, management’s estimates or opinions should change, except as required by securities legislation. Accordingly, the reader is cautioned not to place undue reliance on forward-looking statements. The Company has included in this news release certain non-IFRS performance measures, including, but not limited to, mine operating profit, mining and processing costs and cash costs. Cash costs per ounce reflect actual mine operating costs incurred during the fiscal period divided by the number of ounces produced. These measures are not defined under IFRS and therefore should not be considered in isolation or as an alternative to or more meaningful than, net income (loss) or cash flow from operating activities as determined in accordance with IFRS as an indicator of our financial performance or liquidity. The Company believes that, in addition to conventional measures prepared in accordance with IFRS, certain investors use this information to evaluate the Company’s performance and ability to generate cash flow.

Table 1: Kiena Complex Underground Drilling Assay and Composite Results

Composites

Hole No. From
(m)
To
(m)
Core
Length (m)
Estimated True
width (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N103-6839 733.8 739.6 5.8 3.8 5.48 5.48 South Limb
N103-6839W1A 228.9 239.2 10.3 5.5 18.80 16.91 South Limb
N103-6839W2 149.8 159.0 9.2 5.3 3.32 3.32 South Limb
N103-6839W3 254.6 267.0 12.4 5.5 20.33 18.99 South Limb
N112-6838A 243.7 246.7 3.0 3.0 16.25 16.25 South Limb
N103-6839W2 162.0 169.5 7.5 4.5 14.79 14.79 A1 Zone
N112-6823A 302.2 308.2 6.0 3.8 4.55 4.55 A1 Zone
N112-6833 260.8 282.8 22.0 10.0 13.15 13.15 A1 Zone
N112-6838A 266.2 272.6 6.4 4.3 36.00 32.37 A1 Zone
N112-6841 258.0 266.7 8.7 5.5 6.76 6.76 A1 Zone
N112-6823A 322.8 327.3 4.5 3.9 5.94 5.94 A2 Zone
Hole No. From
(m)
To
(m)
Core
Length (m)
Estimated True
width (m)
Grade
(g/t Au)
Cut Grade
(35 g/t Au)
Name Zone
N103-6839W1A 163.2 216.7 53.5 ? 10.39 5.91 NEW
N103-6839W2 97.5 138.8 41.3 ? 11.55 9.70 NEW
N103-6839W3 210.0 235.5 25.5 ? 9.98 7.34 NEW
N103-6839W4 260.4 261.9 1.5 ? 2,849.67 35.00 NEW

Assays

Hole No. From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N103-6839 733.8 735.3 1.5 8.18 8.18 A Zone
N103-6839 735.3 736.8 1.5 0.02 0.02 A Zone
N103-6839 736.8 738.0 1.2 0.04 0.04 A Zone
N103-6839 738.0 739.0 1.0 1.46 1.46 A Zone
N103-6839 739.0 739.6 0.6 30.00 30.00 A Zone
             
Hole No. From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(35 g/t Au)
Name Zone
N103-6839W1A 163.2 164.7 1.5 4.65 4.65 ?
N103-6839W1A 164.7 166.2 1.5 6.38 6.38 ?
N103-6839W1A 166.2 167.7 1.5 3.53 3.53 ?
N103-6839W1A 167.7 169.2 1.5 7.95 7.95 ?
N103-6839W1A 169.2 170.7 1.5 7.35 7.35 ?
N103-6839W1A 170.7 172.2 1.5 55.80 35.00 ?
N103-6839W1A 172.2 173.7 1.5 174.00 35.00 ?
N103-6839W1A 173.7 175.2 1.5 4.54 4.54 ?
N103-6839W1A 175.2 176.7 1.5 2.42 2.42 ?
N103-6839W1A 176.7 178.2 1.5 4.12 4.12 ?
N103-6839W1A 178.2 179.7 1.5 19.15 19.15 ?
N103-6839W1A 179.7 181.2 1.5 2.25 2.25 ?
N103-6839W1A 181.2 182.7 1.5 3.92 3.92 ?
N103-6839W1A 182.7 184.2 1.5 4.10 4.10 ?
N103-6839W1A 184.2 185.7 1.5 1.36 1.36 ?
N103-6839W1A 185.7 187.2 1.5 6.55 6.55 ?
N103-6839W1A 187.2 188.7 1.5 0.58 0.58 ?
N103-6839W1A 188.7 190.2 1.5 0.06 0.06 ?
N103-6839W1A 190.2 191.7 1.5 1.03 1.03 ?
N103-6839W1A 191.7 193.2 1.5 1.48 1.48 ?
N103-6839W1A 193.2 194.7 1.5 12.30 12.30 ?
N103-6839W1A 194.7 196.2 1.5 4.92 4.92 ?
N103-6839W1A 196.2 197.7 1.5 4.07 4.07 ?
N103-6839W1A 197.7 198.7 1.0 2.26 2.26 ?
N103-6839W1A 198.7 199.7 1.0 2.74 2.74 ?
N103-6839W1A 199.7 200.7 1.0 7.95 7.95 ?
N103-6839W1A 200.7 201.7 1.0 7.78 7.78 ?
N103-6839W1A 201.7 202.7 1.0 1.18 1.18 ?
N103-6839W1A 202.7 203.7 1.0 0.02 0.02 ?
N103-6839W1A 203.7 204.7 1.0 0.04 0.04 ?
N103-6839W1A 204.7 205.7 1.0 0.10 0.10 ?
N103-6839W1A 205.7 206.7 1.0 0.42 0.42 ?
N103-6839W1A 206.7 207.7 1.0 3.75 3.75 ?
N103-6839W1A 207.7 208.7 1.0 1.42 1.42 ?
N103-6839W1A 208.7 209.7 1.0 0.62 0.62 ?
N103-6839W1A 209.7 210.7 1.0 1.56 1.56 ?
N103-6839W1A 210.7 211.7 1.0 1.66 1.66 ?
N103-6839W1A 211.7 212.7 1.0 6.23 6.23 ?
N103-6839W1A 212.7 213.7 1.0 9.77 9.77 ?
N103-6839W1A 213.7 214.7 1.0 0.80 0.80 ?
N103-6839W1A 214.7 215.7 1.0 1.86 1.86 ?
N103-6839W1A 215.7 216.7 1.0 6.90 6.90 ?
             
Hole No. From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N103-6839W1A 228.9 229.9 1.0 5.39 5.39 A Zone
N103-6839W1A 229.9 230.9 1.0 8.55 8.55 A Zone
N103-6839W1A 230.9 231.9 1.0 21.40 21.40 A Zone
N103-6839W1A 231.9 232.9 1.0 0.48 0.48 A Zone
N103-6839W1A 232.9 233.9 1.0 1.16 1.16 A Zone
N103-6839W1A 233.9 234.9 1.0 0.88 0.88 A Zone
N103-6839W1A 234.9 235.9 1.0 0.56 0.56 A Zone
N103-6839W1A 235.9 236.9 1.0 0.35 0.35 A Zone
N103-6839W1A 236.9 237.7 0.8 0.44 0.44 A Zone
N103-6839W1A 237.7 239.2 1.5 103.00 90.00 A Zone
             
Hole No. From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(35 g/t Au)
Name Zone
N103-6839W2 97.5 99.0 1.5 6.56 6.56 ?
N103-6839W2 99.0 100.5 1.5 4.07 4.07 ?
N103-6839W2 100.5 102.0 1.5 2.14 2.14 ?
N103-6839W2 102.0 103.5 1.5 31.90 31.90 ?
N103-6839W2 103.5 105.0 1.5 2.78 2.78 ?
N103-6839W2 105.0 106.5 1.5 3.01 3.01 ?
N103-6839W2 106.5 108.0 1.5 84.00 35.00 ?
N103-6839W2 108.0 109.5 1.5 2.53 2.53 ?
N103-6839W2 109.5 111.0 1.5 4.39 4.39 ?
N103-6839W2 111.0 112.5 1.5 36.90 35.00 ?
N103-6839W2 112.5 114.0 1.5 6.91 6.91 ?
N103-6839W2 114.0 115.5 1.5 8.43 8.43 ?
N103-6839W2 115.5 117.0 1.5 4.16 4.16 ?
N103-6839W2 117.0 118.5 1.5 4.61 4.61 ?
N103-6839W2 118.5 119.7 1.2 4.37 4.37 ?
N103-6839W2 119.7 120.3 0.6 4.84 4.84 ?
N103-6839W2 120.3 121.5 1.2 19.55 19.55 ?
N103-6839W2 121.5 123.0 1.5 5.28 5.28 ?
N103-6839W2 123.0 124.5 1.5 4.17 4.17 ?
N103-6839W2 124.5 126.0 1.5 12.90 12.90 ?
N103-6839W2 126.0 127.5 1.5 5.44 5.44 ?
N103-6839W2 127.5 129.0 1.5 2.30 2.30 ?
N103-6839W2 129.0 130.1 1.1 5.72 5.72 ?
N103-6839W2 130.1 130.8 0.7 2.42 2.42 ?
N103-6839W2 130.8 131.8 1.0 25.00 25.00 ?
N103-6839W2 131.8 132.8 1.0 8.78 8.78 ?
N103-6839W2 132.8 133.8 1.0 5.46 5.46 ?
N103-6839W2 133.8 134.8 1.0 4.06 4.06 ?
N103-6839W2 134.8 135.8 1.0 4.95 4.95 ?
N103-6839W2 135.8 136.8 1.0 6.42 6.42 ?
N103-6839W2 136.8 137.8 1.0 30.60 30.60 ?
N103-6839W2 137.8 138.8 1.0 3.49 3.49 ?
             
Hole No. From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N103-6839W2 149.8 150.8 1.0 3.70 3.70 A Zone
N103-6839W2 150.8 152.1 1.3 4.71 4.71 A Zone
N103-6839W2 152.1 152.9 0.8 2.37 2.37 A Zone
N103-6839W2 152.9 154.0 1.1 0.90 0.90 A Zone
N103-6839W2 154.0 155.5 1.5 0.92 0.92 A Zone
N103-6839W2 155.5 156.0 0.5 1.57 1.57 A Zone
N103-6839W2 156.0 157.0 1.0 4.43 4.43 A Zone
N103-6839W2 157.0 158.0 1.0 7.80 7.80 A Zone
N103-6839W2 158.0 159.0 1.0 3.45 3.45 A Zone
             
Hole No. From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N103-6839W2 162.0 163.0 1.0 8.32 8.32 A1 Zone
N103-6839W2 163.0 164.0 1.0 19.75 19.75 A1 Zone
N103-6839W2 164.0 165.0 1.0 3.32 3.32 A1 Zone
N103-6839W2 165.0 166.0 1.0 1.04 1.04 A1 Zone
N103-6839W2 166.0 167.0 1.0 2.54 2.54 A1 Zone
N103-6839W2 167.0 167.8 0.8 0.38 0.38 A1 Zone
N103-6839W2 167.8 168.5 0.7 12.90 12.90 A1 Zone
N103-6839W2 168.5 169.5 1.0 66.60 66.60 A1 Zone
             
Hole No. From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(35 g/t Au)
Name Zone
N103-6839W3 210.0 211.5 1.5 8.10 8.10 ?
N103-6839W3 211.5 213.0 1.5 2.67 2.67 ?
N103-6839W3 213.0 214.5 1.5 0.56 0.56 ?
N103-6839W3 214.5 216.0 1.5 4.05 4.05 ?
N103-6839W3 216.0 217.0 1.0 157.50 35.00 ?
N103-6839W3 217.0 218.0 1.0 5.58 5.58 ?
N103-6839W3 218.0 219.0 1.0 5.15 5.15 ?
N103-6839W3 219.0 220.0 1.0 1.50 1.50 ?
N103-6839W3 220.0 221.0 1.0 3.79 3.79 ?
N103-6839W3 221.0 222.0 1.0 2.81 2.81 ?
N103-6839W3 222.0 222.9 0.9 1.29 1.29 ?
N103-6839W3 222.9 223.9 1.0 6.85 6.85 ?
N103-6839W3 223.9 225.0 1.1 6.22 6.22 ?
N103-6839W3 225.0 226.0 1.0 2.93 2.93 ?
N103-6839W3 226.0 227.0 1.0 2.36 2.36 ?
N103-6839W3 227.0 228.0 1.0 1.32 1.32 ?
N103-6839W3 228.0 229.0 1.0 2.37 2.37 ?
N103-6839W3 229.0 230.0 1.0 1.34 1.34 ?
N103-6839W3 230.0 231.0 1.0 10.85 10.85 ?
N103-6839W3 231.0 232.5 1.5 2.30 2.30 ?
N103-6839W3 232.5 234.0 1.5 3.12 3.12 ?
N103-6839W3 234.0 235.5 1.5 7.35 7.35 ?
             
Hole No. From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N103-6839W3 254.6 255.6 1.0 9.87 9.87 A Zone
N103-6839W3 255.6 256.6 1.0 2.87 2.87 A Zone
N103-6839W3 256.6 257.6 1.0 22.20 22.20 A Zone
N103-6839W3 257.6 258.5 0.9 5.66 5.66 A Zone
N103-6839W3 258.5 259.4 0.9 1.30 1.30 A Zone
N103-6839W3 259.4 260.2 0.8 0.58 0.58 A Zone
N103-6839W3 260.2 261.2 1.0 4.95 4.95 A Zone
N103-6839W3 261.2 262.2 1.0 4.32 4.32 A Zone
N103-6839W3 262.2 263.1 0.9 94.40 90.00 A Zone
N103-6839W3 263.1 263.9 0.8 0.62 0.62 A Zone
N103-6839W3 263.9 264.8 0.9 0.47 0.47 A Zone
N103-6839W3 264.8 265.9 1.1 29.70 29.70 A Zone
N103-6839W3 265.9 267 1.1 59.70 59.70 A Zone
             
Hole No. From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(35 g/t Au)
Name Zone
N103-6839W4 260.4 260.9 0.5 269.00 35.00 ?
N103-6839W4 260.9 261.9 1.0 4140.00 35.00 ?
             
Hole No. From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N112-6823A 302.2 303.7 1.5 1.38 1.38 A1 Zone
N112-6823A 303.7 305.2 1.5 12.30 12.30 A1 Zone
N112-6823A 305.2 306.7 1.5 4.26 4.26 A1 Zone
N112-6823A 306.7 308.2 1.5 0.26 0.26 A1 Zone
             
Hole No. From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N112-6823A 322.8 324.3 1.5 1.30 1.30 A2 Zone
N112-6823A 324.3 324.8 0.5 6.65 6.65 A2 Zone
N112-6823A 324.8 325.8 1.0 11.45 11.45 A2 Zone
N112-6823A 325.8 327.3 1.5 6.66 6.66 A2 Zone
             
Hole No. From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N112-6833 260.8 261.8 1.0 5.46 5.46 A1 Zone
N112-6833 261.8 263.3 1.5 0.27 0.27 A1 Zone
N112-6833 263.3 264.1 0.8 80.30 80.30 A1 Zone
N112-6833 264.1 264.8 0.7 85.20 85.20 A1 Zone
N112-6833 264.8 265.5 0.7 15.60 15.60 A1 Zone
N112-6833 265.5 266.1 0.6 6.80 6.80 A1 Zone
N112-6833 266.1 267.0 0.9 5.94 5.94 A1 Zone
N112-6833 267.0 267.8 0.8 20.10 20.10 A1 Zone
N112-6833 267.8 268.8 1.0 6.82 6.82 A1 Zone
N112-6833 268.8 269.8 1.0 2.92 2.92 A1 Zone
N112-6833 269.8 270.8 1.0 1.37 1.37 A1 Zone
N112-6833 270.8 271.8 1.0 1.64 1.64 A1 Zone
N112-6833 271.8 272.8 1.0 0.91 0.91 A1 Zone
N112-6833 272.8 273.8 1.0 2.23 2.23 A1 Zone
N112-6833 273.8 274.6 0.8 7.42 7.42 A1 Zone
N112-6833 274.6 275.5 0.9 3.91 3.91 A1 Zone
N112-6833 275.5 276.8 1.3 11.10 11.10 A1 Zone
N112-6833 276.8 277.6 0.8 61.50 61.50 A1 Zone
N112-6833 277.6 278.4 0.8 7.05 7.05 A1 Zone
N112-6833 278.4 279.8 1.4 0.53 0.53 A1 Zone
N112-6833 279.8 280.5 0.7 1.51 1.51 A1 Zone
N112-6833 280.5 281.3 0.8 4.24 4.24 A1 Zone
N112-6833 281.3 282.8 1.5 15.50 15.50 A1 Zone
             
Hole No. From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N112-6838A 243.7 245.0 1.3 0.18 0.18 A Zone
N112-6838A 245.0 246.0 1.0 48.40 48.40 A Zone
N112-6838A 246.0 246.7 0.7 0.16 0.16 A Zone
             
Hole No. From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N112-6838A 266.2 267.7 1.5 0.70 0.70 A1 Zone
N112-6838A 267.7 269.2 1.5 0.28 0.28 A1 Zone
N112-6838A 269.2 269.7 0.5 42.10 42.10 A1 Zone
N112-6838A 269.7 270.7 1.0 36.70 36.70 A1 Zone
N112-6838A 270.7 272.2 1.5 104.50 90.00 A1 Zone
             
Hole No. From
(m)
To
(m)
Core
Length (m)
Grade
(g/t Au)
Cut Grade
(90 g/t Au)
Name Zone
N112-6841 258.0 259.0 1.0 4.58 4.58 A Zone
N112-6841 259.0 260.0 1.0 6.87 6.87 A Zone
N112-6841 260.0 261.0 1.0 9.86 9.86 A Zone
N112-6841 261.0 262.0 1.0 4.23 4.23 A Zone
N112-6841 262.0 263.0 1.0 5.95 5.95 A Zone
N112-6841 263.0 264.0 1.0 2.15 2.15 A Zone
N112-6841 264.0 265.0 1.0 10.75 10.75 A Zone
N112-6841 265.0 266.2 1.2 0.39 0.39 A Zone
N112-6841 266.2 266.7 0.5 27.90 27.90 A Zone

Photos accompanying this announcement are available at: 

https://www.globenewswire.com/NewsRoom/AttachmentNg/f4aae5cf-a3dc-45ef-89f2-56dad04ca80c

https://www.globenewswire.com/NewsRoom/AttachmentNg/5c584b31-86d0-40a6-a0ca-9d78446138e6

https://www.globenewswire.com/NewsRoom/AttachmentNg/22ea972e-e5ff-4026-b8c4-aa4b75f4728f

PDF available: http://ml.globenewswire.com/Resource/Download/4d589122-ffbd-48c1-86a0-77f64827482d


Resource News, Oil and Gas News, Mining News, Renewable News